Column Covers / Column Wraps

Description – Used as Column Wraps over steel or concrete columns.

Main uses – Commercial, hospitality, retail, medical facilities, car dealerships

Sizes – 6” outside diameter up to 30” OD for two piece columns. Larger diameters can be produced in 3 or 4 pieces

Download Brochure
Round drywall Column Cover

Column Covers (1/2" thick, Full Column)

Inside DiameterOutside Diameter8' Long10' Long
7"8"$175$230
8"9"$176$232
9"10"$182$234
9.5"10.5"$184$236
11"12"$190$240
12"13"$210$244
14"15"$230$250
15"16"$255$275
16"17"$265$290
19"20"$285$300
23"24"$325$340
24"25"$335
$350
26 1/2"27 1/2"$345$360
28"29"$350$375
29"30"$370$410
30"31"$400$420

Column Covers (1/2" thick, Half Column)

Inside DiameterOutside Diameter8' Long10' Long
7"8"$95$125
8"9"$98$126
9"10"$99$127
9.5"10.5"$102$128
11"12"$105$130
12"13"$115$135
14"15"$125$140
15"16"$135$145
16"17"$138$150
19"20"$160$165
23"24"$180$185
24"25"$190$195
26 1/2"27 1/2"$185$200
28"29"$200$205
29"30"$215$225
30"31"$225$235

– Column covers have drywall paper on the outside (convex) face, unfinished inside

– Column Wraps have a short flat where the two halves meet. This allows the finisher to ‘bury’ the taped joint within the round profile. This makes finishing easier by avoiding floating out a butt around the curve. A curved sanding block is included to make finishing easier.

– Typically only the end studs are needed. Since the curves are pre-formed, it is not necessary to add multiple studs along the curve to form the drywall around. For diameter 18” and above, additional studs should be added at roughly 16” centers to maintain support.

– For larger columns it is sometimes easier to cinch the two halves together with a belt and ratchet to hold in place while screwing off

– If you need to cut to length, the easiest way is on a table saw. You can cut with a knife but unlike drywall, you have to cut all the way through both faces. You can’t cut one face and snap like drywall